PDA

View Full Version : [FIXED] Upgrading Architect 2.0 project to 2.1 removes preventHeader



mpuccerella
30 Aug 2012, 2:05 PM
When our projects were upgraded to Architect 2.1, the preventHeader attribute was erased from the ext components across all of our files. Every location that had a preventHeader requires you to go to the component, search for header, enable header, then disable header to get the same functionality.

This means that a manual process has to happen where exports pre 2.1 upgrade are gone through to look for every instance of preventHeader, then setting "header" to false in that component by hand.

aconran
30 Aug 2012, 2:15 PM
Thanks for the report! I have opened a bug in our bug tracker.

natedsaint
4 Oct 2012, 7:48 AM
Now when converting an old project, I get this:<br>
<img src="http://www.sencha.com/forum/attachment.php?attachmentid=39144&amp;stc=1" attachmentid="39144" alt="" id="vbattach_39144" class="previewthumb"><br>
<br>
I don't see a place in the old version of the project that used preventHeader in this case, so I can't verify that it was using preventHeader and got converted or if this is just a general error regarding that new behavior. <br>
<br>
Steps to reproduce:<br>
1) Attempt to open older file<br>
2) Accept dialog option to convert file<br>
3) File closes, says will re-open<br>
4) Observed bug, reported here.

aconran
4 Oct 2012, 9:04 AM
Thanks for the report; we ran into this one internally a few days ago and have it fixed for the next release.