PDA

View Full Version : Resolution issue happened in projector



samarth
7 May 2012, 1:31 AM
Hi i have created a login page. I have tested in different resolution of the monitor. When i have connected to the projector then that page alignment has miss placed. I have used several images for creating login page. I was not getting this solution. Please help me in this issue.

Thanks in advance.

scottmartin
7 May 2012, 7:00 AM
So the login page is fine on the PC in all tested resolutions, but not on the overhead? You will need to verify the resolution of the overhead matches and that it does not need adjustments.

Regards,
Scott.

samarth
7 May 2012, 7:50 PM
So the login page is fine on the PC in all tested resolutions, but not on the overhead? You will need to verify the resolution of the overhead matches and that it does not need adjustments.

Regards,
Scott.

Hi Scott,
Any solution is there to solve this issue. I am fed up with this problem. Please help me in this issue.

Thanks in advance.

scottmartin
8 May 2012, 8:18 AM
Can you provide a bit more detail ... I am still not clear about your setup.

Scott

samarth
8 May 2012, 8:01 PM
Can you provide a bit more detail ... I am still not clear about your setup.

Scott

Hi Scott,
Several images are used to create a login page. I have attached a file please view that attachment. Please help me in this issue.

Thanks in advance